Rua dos Bororós, nº 84, Distrito Industrial, ZIP 89239-290.
Phone +55 (47) 3441 5000
Joinville, in the north of Santa Catarina, is the city where Tigre is headquartered and where its Administrative Center and one of the largest Operation Centers of the Group are located. In 1958, in a pioneering and innovating manner, Tigre started in Joinville the manufacturing of the first PVC pipes. In 1979, the company inaugurated its Fittings plant. Soon after professionalizing its management, in 1995, it started the process of modernizing its units and took its administrative to Joinville again.
Rio Claro (SP)
Avenida Brasil, nº 4233, Distrito Industrial, ZIP 13505-600
Phone: +55 (19) 2112 9600.
The largest manufacturing plant of transforming plastic (PVC) in the world, the Tigre Unit at Rio Claro (SP) accounts for 14% of the total of taxes collected in the municipality. On September 9 the company commemorated the anniversary of the unit, which has the capacity installed to transform 140 thousand tins of PVC/year.
Modern and efficient, the buildings of the unit cover an area of 60 thousand square meters, on a plot of land measuring 230 thousand square meters. There are 940 direct jobs, thousands of indirect jobs (vendors, logistics and contractors) and it generates a lot of taxes for the town and state.
Rua dos Pigmentos, nº 285, Área Industrial Leste, Complexo Petroquímico, ZIP 42810-000.
Phone: +55 (71) 2108 6400
The Tigre Unit in Camaçari, in Bahia, inaugurated in 1982, mainly supplies the market of the Northeast of Brazil and confirms the concern of the company to attend to all the regions of the country. The plant commemorated its anniversary on April 27 and is responsible for manufacturing PVC pipes and distributing Tigre products in the Northeastern region of the country. The Unit is located in the Petrochemical area of Camaçari.
Avenida Tigre, 660, Vila Santa Cruz, ZIP 84168-215.
Phone: +55 (42) 3232 8100
The largest plant on the American continent in its area, Pincéis Tigre is located in the municipality of Castro, inside the state of Paraná. The company has existed for more than 75 years and became part of the Tigre Group in1997. It offers more than two thousand products, divided into the artistic/handicraft, real estate and scholastic lines. The Mestre brand is a reference in brushes and accessories for painting buildings, whereas Pinctore develops the best solutions for artistic and school painting.
Rua Francisco Lanzi Tancler, nº 133, Distrito Industrial, ZIP 13347-370
Phone: +55 (19) 2107 0900
Also access: www.clarisportasejanelas.com.br
Claris, located in Indaiatuba (SP), is the company of the Tigre Group responsible for the assembly and sale of a revolutionary concept of Doors and Windows made of PVC, which for many years has been successful in Europe and the USA. The operation of profiles made of PVC was started in 1998.
Pouso Alegre (MG)
Rod. Fernão Dias - BR 381, S/N, KM 862,5 - Bairro Algodão - Cep 37.550-000
Telephone: +55 (35) 2102 7100
Plena, a brand of accessories for bathrooms, laundries, outside areas and complementary hydraulic products, in October 2008 inaugurated its factory: SILVER Indústria e Comércio de Acessórios para Construção Civil Ltda, controlled by Tigre S/A. Located in Pouso Alegre, MG, 200 km from the city of São Paulo, it has installations with an area of 127 thousand m² and has 18 thousand m² of constructed area, currently the 3rd largest unit of the Tigre Group.
Calle 12, nº70, Parque Industrial Pilar, Pilar em Pcia. de Buenos Aires.
Phones: +54 (2322) 497000 - 0800-999-8447
Since 1998, the Industrial Park of Pilar, in Argentina, is home to the most modern and automated plant of pipes and fittings in the country. In order to complete the portfolio of PVC fittings for the Argentinean market, in 1999 Tigre acquired the company Santorelli, which contributed with a strong local brand and allowed the presence of the company to be consolidated in the neighboring country.
Parque Industrial R. Dario Gutiérrez, PI-22, Santa Cruz de la Sierra.
Phone: +591 (3) 346 3095
The cities of Santa Cruz de La Sierra, El Alto and La Paz shelter the operations of Tigre in Bolivia, a country where the company has been active since the purchase of the local group Plasmar. The investment in Bolivia occurred in 2000.
Avda. La Montaña, 754, Loteo los Libertadores, Comuna de Colina em Santiago.
Phones: +56 (2) 444 3900 - 800 365 700
In the town of Colina, in Chile, there is one of the most modern plants of Tigre, with the capacity to transform 25 thousand tons of plastic per year. In 1997, the control of the company Fanaplas was acquired in Chile. This first step not only allowed a better knowledge of the country but also provided the certainty that without local leadership Tigre would not manage to obtain the scale required and consequently the results desired. Two years afterwards, the company bought at the same time three Chilean companies (Plastica 21, Reifox and Saladillo), at that moment assuming the vice leadership of the market.
Avenida Cacique Lambaré, 2244 c Acosta Ñú, Lambaré
Phone: +595 (21) 905452.
Tigre started its process of internationalization more than a decade before the phenomenon of globalization came to the Brazilian companies. With Tubopar, constituted in Paraguay, in 1977, in partnership with local businessmen, Tigre is the absolute leader of that market, with a share of approximately 80%.
2315, Beloit Avenue, Janesville, Wisconsin, Zipcode 53545.
Janesville, Wisconsin, is the location of Tigre in the USA. Since 2006 Tigre has been manufacturing PVC molded fittings for plumbing and municipal application, supplying good quality products for wholesalers and distributors in the entire country.
Panamericana Norte, KM 12 e meio Y El Arenal Complejo Ind. Delta, Quito.
Phone: +593 (2) 242 2628.
The capital of Ecuador, Quito, has housed a distribution center of Tigre since 2006. The company had already been present in that market for several years, by means of local distributor, which imported the Tigre products from Brazil. In 2007, Ecuador received its first manufacturing unit of the Brazilian multinational.
Calle 16, n° 120 - Altura Cuadra 16 Av. La Paz, em San Miguel, Lima.
Phone: 51-1 578.2989 / FAX: 51- 1 578.2729.
In January 2008, the Tigre Group acquired the company Plastica S/A. Headquartered in Lima, the capital of Peru, Plastica has a significant market share in the country, which will increase with its incorporation by Tigre. The Peruvian economy is undergoing a good period, with stable inflation and growth above the average.
Parque Industrial Lebbos, Bodegas 7 y 8, Km 2 Via Siberia Cota, Cota - Cundinamarca
Phone: 57 1 472 6465
Since June 2008, Tigre has been active in its manufacturing unit in Colombia, located in the municipality of Cota, in the suburbs of Bogotá, a region of great natural beauty, where many companies are being built. The Tigre products were already known in the country, which received the Tigre Solutions via imports, performed by local distributors. Colombia is the second most populated and the third richest country in South America. It is a developing nation with many opportunities ahead.
Isabela 3303, Montevideu.
Phone: (598 2) 21 60203 - 0800 8343 / Fax (598 2) 21 64011.
In October 2006, Tigre S/A inaugurated a Distribution Center in Uruguay, a country with the basic feature of a strong agricultural sector, aimed at exportation.